Power Supplies for CB and Ham Radio
Power Supply for CB and Ham Radio
Power Supply 20/30 amp for cb and ham radio, Sharman,Moonraker SM30-SWI,SM 3011,SM30SWIV,
Power Supplies for CB and Ham Radio
Hi Way 3 Pin Fused CB Power Lead, 20 Gauge DC CableA heavy duty DC power lead for connecting a CB radio to a 12V supply, supplied ready to use with fuse protection. - Heavy duty 20 gauge DC power lead - 3 pin moulded connector - Fitted fuse holder - Supplied with a 2 amp fuse
Power Supplies for CB and Ham Radio
Sharman SM30 Switch Mode Power Supply (20A Constant / 30A Peak)A compact switch-mode power supply for CB and amateur radio, with a switchable illuminated analogue volt/amp meter and a rear cooling fan. - Input: AC 220-230V, 50-60 Hz - Fixed output: 13.8V DC - Output current: 20A constant, 30A peak - Output voltage regulation: below 2% - Ripple and noise: 80 mVp-p at rated load - Illuminated switchable analogue volt and amp meter - Front cigarette lighter socket for plug-in equipment up to 10A - Rear DC output terminals - Noise offset knob to suppress interference - Rear cooling fan - Short-circuit and overload protection - Robust metal casing with rubber feet and operating LED - Dimensions: 150 mm (W) x 75 mm (H) x 195 mm (D), excluding protrusions - Weight: 1.64 kg (including cable)
Power Supplies for CB and Ham Radio
Sharman SM30SWIV Switch Mode Power Supply, 20A Continuous / 30A SurgeThe Sharman SM30SWIV is a compact switch mode power supply delivering 13.8 VDC at 20 Amps continuous and 30 Amps surge, ideal for powering CB and ham radio equipment. - Output: 13.8 VDC at 20A continuous, 30A surge - Output voltage: fixed 13.8 VDC or adjustable 9 to 15 VDC - Rear panel red and black 30A terminals - Front panel low-amperage tip jacks - LCD digital meter displaying voltage and current simultaneously - Noise Off-Set control to reduce pulse noise - Ripple: less than 100 mV p-p at load - Input: 110 or 220 VAC, switch selectable on the rear panel - Dimensions: 155 x 70 x 205 mm (6.1 x 2.8 x 8.1 inches) - Weight: 1.5 kg (3.3 pounds)
Power Supplies for CB and Ham Radio
SM 3011 Switch Mode Power Supply, 30A, 220-240V AC, 9-15V DCA high-power switch mode DC regulated power supply delivering up to 30A maximum current, suitable for CB, ham and SSB home base stations. It includes over-voltage, current-limiting and short-circuit protection for reliable operation. - Model: SM 3011 - Input voltage: 220-240V AC, 50-60 Hz - Output voltage: 13.8V DC, or 9-15V DC adjustable - Output current: 30A maximum - Voltage and current meter - Noise offset volume control - Voltage adjustment knob - Over-voltage, current-limiting and short-circuit protection - Output control switch - Lightweight, compact design - Dimensions: 170 (W) x 120 (H) x 230 (L) mm - Weight: 2.5 kg
